Class A & Class B Licensed Asbestos Removal

Asbestos Removal Friable & Bonded

Hazclear Environmental holds both Class A and Class B asbestos removal licences and removes friable and bonded asbestos from residential, commercial and industrial sites across Queensland.

Removal is carried out under controlled work methods — containment, decontamination, regulated waste handling and project closeout documentation — so each job is delivered safely and remains defensible on the record.

Request a Quote Call 07 2103 4411

What’s included

Friable Asbestos Removal

Removal of friable asbestos under negative pressure enclosure by a Class A licensed removalist.

Bonded Asbestos Removal

Removal of bonded (non-friable) asbestos cement sheeting, roofing, eaves and cladding.

Regulated Waste Handling

Asbestos waste contained, transported and disposed of through licensed pathways with waste tracking.

Closeout Documentation

Asbestos Removal Control Plans, waste records and clearance documentation prepared for your records.

TYPES OF ASBESTOS REMOVAL

Two Licence Classes, Two Types of Asbestos Removal

Class A — friable asbestos

Asbestos that can release fibres when being disturbed or removed. Removal requires a Class A licence, a sealed enclosure, negative air pressure , air monitoring and an independent clearance.

Friable Asbestos Removal
Asbestos Removal

Class B — bonded asbestos

Asbestos that is firmly bound into a solid material matrix such as cement sheeting or roofing. A Class B licence is required to remove more than 10 m² of bonded asbestos in Queensland .

Bonded Asbestos Removal

Before we start

  • A Form 65 Notification to Workplace Health and Safety Queensland is lodged prior to work starting
  • A site specific Asbestos Removal Control Plan is prepared before work begins
  • A site specific Safe Work Method Statement is prepared before works begins
Containment area established before asbestos removal begins

While we work

  • The work area is barricaded off, appropriate asbestos signage is displayed and an exclusion zone is established. 
  • Removal is carried out carefully using controlled methods that minimise fibre release.
  • Decontamination of the work area, plant and personnel is completed.

The waste handling

  • Asbestos waste is securely double-bagged or double-wrapped and clearly labelled prior to leaving the work area.
  • Regulated waste is transported under ERA 57 requirements to appropriately licensed waste disposal facilities.
  • Waste Tracking Certificates are provided for each load, documenting the waste source, transport details and disposal location.
Aerial view of asbestos waste staged for licensed transport and disposal

The Clearance process

  • A thorough visual inspection is completed to confirm all identified asbestos-containing materials have been removed from the work area.
  • Clearance inspections are conducted by a licensed independent asbestos consultant where required by legislation.
  • Clearance documentation is issued upon successful inspection, confirming the area is suitable for normal reoccupation.

Common questions (FAQ)

Bonded asbestos is firmly bound into a solid material, such as cement sheeting or roofing. Friable asbestos can be crumbled to powder when dry and is more likely to release airborne fibres, requiring higher-level controls, Class A licensing and independent clearance.

A Class A licence is required for any amount friable asbestos. A Class B licence is required to remove more than 10 m² of bonded asbestos. Hazclear holds both Class A and Class B licences.

Air monitoring is required for friable (Class A) removal and is commonly used for higher-risk bonded works, occupied sites and sensitive premises such as schools.

Yes. You may request the Asbestos Removal Control Plan, waste disposal records and, where applicable, air monitoring results and clearance certificate.

Contact Us

Request a removal quote by sending through the site details, and we will review and get back to you as soon as possible